Was the Instrument Cluster Diagnostic System Check performed?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Was the PCM Diagnostic System Check performed?

--

Go to Step 3

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 2.5L (LB8) and 3.0L (L46)

1. Install a scan tool.
2. Turn the ignition switch to the RUN position.
3. Establish communication with the instrument cluster.
4. WOW the instrument cluster ON and OFF.

Does the Low Fuel indicator light toggle ON and OFF?

--

Go to Step 4

Go to Step 5

1. Install a scan tool.
2. Turn the ignition switch to the RUN position.
3. Observe the low fuel indicator lamp input.

Does the low fuel lamp read active with the lamp illuminated?

--

Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 2.5L (LB8) and 3.0L (L46)

Go to Step 5

Replace the instrument cluster. Refer to Instrument Cluster Replacement .

Is the repair complete?

--

Go to Diagnostic System Check - Instrument Cluster

--