Use 1 of the following 2 methods in order
to clear diagnostic trouble codes (DTCs) in the BCM memory:
• | The ignition cycle default method |
The following methods will NOT clear BCM DTCs:
• | Unplugging the BCM electrical connectors |
• | Disconnecting the battery cables |
• | Turning the ignition switch off (except on an ignition cycle default) |
Scan Tool Method
Refer to the scan tool user's manual for menu navigation instructions.
Ignition Cycle Default
The body control module (BCM) clears a diagnostic trouble code (DTC)
automatically when the malfunction that set the DTC does not occur for 100 ignition
cycles.