GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal (China) 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Removal

Removal Procedure
  1. Open and support the rear door.

    2. Object Number: 467485 Size: SH
  2. Remove the conduit. Refer to Rear Side Door Conduit Replacement .
  3. Remove the intermediate door hinge bolts.
  4. Remove the door.

Installation Procedure

    Object Number: 467485 Size: SH
  1. Install the door.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

    Important: Use Loctite® Blue GM P/N 12345382 or equivalent prior to installing the fasteners.

  2. Install the intermediate door hinge bolts.

    3. Tighten
    Tighten the bolts to 33 N·m (24 lb ft).

  3. Remove the support.
  4. Install the conduit. Refer to Rear Side Door Conduit Replacement .
  5. Close the rear door.