Removal Procedure
Raise the head restraint (4) to the full up position.
- Insert a small rounded tool (2) such as an allen wrench into the
hole in the headrest retainer (1) in order to release the lock tab.
- Remove the head restraint from the seat back.
- Use the following procedure to remove the two support rods from
the head restraint:
• | Firmly grasp each rod and rotate it 90 degrees. |
• | Pull the rods out of the head restraint. |
Installation Procedure
- With the notches facing the front, push the support rods fully
into the head restraint.
- Position the head restraint
(4) to the headrest retainer
- Push the head restraint all the way down.
- Raise the head restraint in order to ensure the restraint stops
at the detent.
- Return the head restraint to the original position.