GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2000 🢒 Regal (China) 🢒 Body and Accessories 🢒 Body Rear End 🢒 Diagnostic System Check - Body Rear End

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

  1. Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.

    2.

  2. The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.

Step

Action

Yes

No

1

Install a scan tool.

Does the scan tool power up?

Go to Step 2

Go to Scan Tool Does Not Power Up

2

  1. Turn ON the ignition, with the engine OFF.
  2. Attempt to establish communication with the Body Control Module.

Does the scan tool communicate with the Body Control Module?

Go to Step 3

Go to Scan Tool Does Not Communicate with Class 2 Data Line

3

Select the Body Control Module display DTCs function on the scan tool.

Does the scan tool display any DTCs?

Go to Step 4

Go to Symptoms

4

Does the scan tool display any DTCs which begin with a U?

Go to Scan Tool Does Not Communicate with Class 2 Data Line In Body Control System

Go to Step 5

5

Does the scan tool display DTC [B1000, B1004, B1007, or B1009]?

Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System

Go to Step 6

6

Does the scan tool display DTC [B1327 or B1328]?

Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System

Go to Step 7

7

Does the scan tool display DTC B3267 Or B3268 ?

Go to Diagnostic Trouble Code (DTC) List/Type in Body Control System

Go to Symptoms