Rear SeatAudio Control Replacement for Buick Regal (China) (CNG) 1999

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.



2. Remove the front floor console rear accessory trim plate.
3. Disconnect the rear seat audio control electrical connectors.
4. Remove the rear seat audio controls from the rear accessory trim plate by pressing in the tabs.

1. Install the front floor console rear accessory trim plate.



2. Connect the rear seat audio control electrical connectors.



3. Install the rear seat audio control by pressing into place until fully seated.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection in Engine Electrical.