The numbers below refer to the step numbers on the diagnostic table.
The presence of DTCs
The symptom list in Symptoms will determine the correct diagnostic procedure to use.
Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Automatic Level Control Schematics | |||
Turn ON the ignition, with the engine OFF. Press the accessory inflator switch for 3 seconds to enter diagnostic mode. After 200 seconds does the LED flash code 12? | Go to Step 2 | Go to Step 4 | |
2 | Press and release the accessory inflator switch. Does the LED in the Switch stop flashing? | Go to Step 3 | -- |
3 | Cycle the ignition switch from ON to OFF. Did you complete the procedure? | System OK | -- |
Does the LED in the accessory inflator switch flash other codes? |