5.1. | Remove the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console. |
5.2. | Rotate the console so that the bottom side is up. |
5.3. | Remove the center duct screws. |
5.4. | Remove the center console duct from the console. |
1.1. | Install the center console duct to the console. |
Notice: Refer to Fastener Notice in the Preface section.
1.2. | Install the center console duct screws. |
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
1.3. | Install the center console. Refer to Front Floor Console Replacement in Instrument Panel, Gages, and Console. |
Important: Align the rear power supply harness away from the center mounting stud of the rear duct.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).