Schematic Reference: Instrument Cluster Schematics

Did you perform the IPC Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Install a scan tool.
2. Turn ON the ignition, with the engine OFF.
3. With a scan tool, observe the engine oil life percent in the PCM data 2 list.

Does the scan tool display zero percent with the Change Engine Oil message on?

Go to Step 3

Go to Step 4

Reset GM engine oil life system. Refer to GM Oil Life System Resetting in Maintenance and Lubrication.

Does the Change Engine Oil message turn off?

Go to Step 5

Go to Step 4

Important: Perform the compass calibration and variance procedure on the replacement IPC.

Replace the IPC. Refer to Instrument Cluster Replacement .

Did you complete the replacement?

Go to Step 5

--

1. Install a scan tool.
2. Turn ON the ignition, with the engine OFF.
3. With a scan tool, observe the Engine Oil Life percent in PCM data 2 list.

Does the scan tool display 100 percent with the Change Engine Oil message off?

System OK

Go to Diagnostic System Check - Engine Controls in Engine Controls