GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - AWD 🢒 Body and Accessories 🢒 Doors 🢒 Rear Side Door Window Outer Sealing Strip Replacement

Removal Procedure

    Object Number: 624486 Size: SH
  1. Position the rear window all the way down.
  2. Remove the outer belt sealing strip screw.
  3. Pull the outer belt sealing strip from the rear door pinchweld flange.

Installation Procedure

    Object Number: 624486 Size: SH
  1. Position the outer belt sealing strip to the rear door pinchweld flange.
  2. Install the sealing strip to the pinchweld flange, pressing into place until full seated.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the outer belt sealing strip screw.

    4. Tighten
    Tighten the screw to 2 N·m (18 lb in).