GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2004 🢒 Rendezvous - AWD 🢒 Engine 🢒 Engine Controls - 3.6L (LY7) 🢒 Intake Manifold Runner Control Solenoid Replacement

Removal Procedure

    Object Number: 1395967 Size: SH

    Important: DO NOT disconnect the power steering hoses or drain the power steering fluid.

  1. Remove and reposition the power steering fluid reservoir to gain access. Refer to Remote Power Steering Fluid Reservoir Replacement in Power Steering System.
  2. Disconnect the electrical connector to the control module for the intake manifold runner.
  3. Remove the intake manifold runner control solenoid bolts.
  4. Remove the intake manifold runner control solenoid.

Installation Procedure

    Object Number: 1395967 Size: SH
  1. Install the intake manifold runner control solenoid.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the intake manifold runner control solenoid bolts.

    3. Tighten
    Tighten the intake manifold runner control solenoid bolts to 10 N·m (89 lb in).

  3. Connect the electrical connector to the control module for the intake manifold runner.
  4. Install the power steering fluid reservoir . Refer to Remote Power Steering Fluid Reservoir Replacement in Power Steering System.