Cooler Pipe Clip Bolts

10 N·m

89 lb in

Cooler Pipe Fittings

27 N·m

20 lb ft

Front Frame Bolt

155 N·m

114 lb ft

Inner Tie Rod

100 N·m

74 lb ft

Intermediate Steering Shaft Bolt

45 N·m

33 lb ft

Pinion Lock Nut

30 N·m

22 lb ft

Power Steering Gear Cylinder End Fittings

27 N·m

20 lb ft

Power Steering Gear Heat Shield Bolts

14 N·m

124 lb in

Power Steering Gear Rack Bearing Preload Adjuster Lock Nut

68 N·m

50 lb ft

Power Steering Gear Valve End Fittings

19 N·m

124 lb in

Power Steering Pressure Pipe/Hose Nut

25 N·m

19 lb ft

Power Steering Pump to Bracket Bolts (LY7)

20 N·m

15 lb ft

Power Steering Reservoir Bracket Bolts

6 N·m

5 lb ft

Power Steering Reservoir Mounting Stud Bolt

25 N·m

19 lb ft

Pressure Hose Fittings

27 N·m

20 lb ft

Pump Bolts (LA1)

34 N·m

25 lb ft

Pump Bolts (LY7)

50 N·m

37 lb ft

Rear Frame Bolt

240 N·m

177 lb ft

Steering Gear Bolt (at Frame)

80 N·m

59 lb ft

Steering Gear Nut (at Frame) *

80 N·m

59 lb ft

Tie Rod Ball Stud Nut *

30 N·m + 120 degrees (2 flats) ¹

22 lb ft + 120 degrees (2 flats) ¹

* This is a prevailing torque type fastener. This fastener may be reused ONLY if:

If the fastener does not meet these criteria, REPLACE the fastener.

¹ Ensure that 2.5-4.5 tie rod end threads are visible beyond the tie rod ball stud nut nylon.