GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Rendezvous - AWD 🢒 Engine 🢒 Engine Controls - 3.6L (LY7) 🢒 Camshaft Position Sensor Replacement - Bank 1 (Right Side) Exhaust

Removal Procedure
  1. Turn the ignition OFF.
  2. Remove the power steering pressure hose bracket nut and reposition as necessary, in order to gain access. Refer to Power Steering Pressure Pipe/Hose Replacement in Power Steering System.

    3. Object Number: 1394032 Size: SH
  3. Disconnect the camshaft position (CMP) sensor electrical connector (1).

    4. Object Number: 1395983 Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure

    Object Number: 1395983 Size: SH
  1. Install the CMP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CMP sensor bolt.

    3. Tighten
    Tighten the CMP sensor bolt to 10 N·m (89 lb in).


    Object Number: 1394032 Size: SH
  3. Connect the CMP sensor electrical connector (1).
  4. Install the power steering pressure hose as necessary. Refer to Power Steering Pressure Pipe/Hose Replacement in Power Steering System.