Removal Procedure
- Position the sunroof to the fully closed position.
- Remove the headliner. Refer to
Headlining Trim Panel Replacement.
- Remove the sunroof control module from the sunroof module by sliding the control module towards the center of the vehicle.
- Disconnect the electrical connectors from the sunroof control module.
- Remove the control module from the vehicle.
Installation Procedure
- Connect the electrical connectors to the sunroof control module.
- Position the control module retainer tabs to the slots in the sunroof module.
- Install the control module to the sunroof module by sliding the control module to the right, pressing into place until fully seated.
- Inspect for the proper operation of the sunroof.
- Install the headliner. Refer to
Headlining Trim Panel Replacement.
- Refer to
Control Module References for programming and setup information.