Rear Side Door Window Switch Replacement Rendezvous

Important: Protect the trim panel at the point of insertion of the flat bladed tool to avoid damaging the door panel.

1. Use a small flat-bladed tool to remove the mounting plate for the power window switch. Insert the tool at the rear of the mounting plate and release the retainer.



2. Lift the rear of the switch plate.



3. Disconnect the electrical connector.
4. Remove the power window switch from the mounting plate.

1. Install the power window switch to the mounting plate.
2. Connect the electrical connector.



3. Insert the front of the mounting plate into the trim panel.



4. Press down on the rear of the mounting plate until the plate is fully seated.