Digital Radio Receiver Replacement. Buick Rendezvous

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - AWD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Digital Radio Receiver Replacement

Removal Procedure

Important: Do not exchange digital radio receivers between vehicles. Exchanging digital receivers between vehicles will activate the digital radio Theftlock. "XM Theftlock" will be displayed.

Remove the I/P compartment. Refer to Instrument Panel Compartment Replacement.

Remove the receiver bracket nuts.
Remove the receiver from the bracket.
Disengage the electrical connector and the antenna connectors from the XM radio receiver.

Remove the XM digital radio receiver from the vehicle.

Installation Procedure

Install the XM digital radio receiver to the receiver bracket.

Notice: Refer to Fastener Notice in the Preface section.

Install the radio receiver nuts.

Tighten
Tighten the nuts to 4 N·m (35 lb in).

Connect the electrical connector and the antenna connectors to the XM radio receiver.
Install the I/P compartment. Refer to Instrument Panel Compartment Replacement.
Perform the setup procedure for the digital radio receiver. Refer to Control Module References for programming and setup information.