- Remove the indicated control
valve body bolts (374-381, 384).
- Carefully lift the fluid
pressure manual valve position switch assembly (395) off of the control valve
body (300). Handle the switch assembly carefully, it is very delicate.
- Remove the control valve
body assembly (300).
- Remove the two retainers (368) from the valve body assembly.
- Remove the spacer plate and gasket assembly (396) with the two
screen/seal assemblies (382) from the valve body (300).
• | Remove the six ball check valves (372, 373) from the valve body
(300). |
• | Remove the case cover pin (410). |
- Remove the four ball check
valves (372) from the case cover (400).