Starter Solenoid Clicks, Engine Does Not Crank. Buick Rendezvous

For 1990-2009 cars only

Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - FWD 🢒 Engine 🢒 Engine Electrical 🢒 Starter Solenoid Clicks, Engine Does Not Crank

The steps below refer to the test steps in the diagnostic table.

Inspect the engine for mechanical failure, or the binding of driven components including driveline related components.

Step	Action	Yes	No
Connector End View Reference: Engine Electrical Connector End Views
1	Did you perform the Engine Electrical Diagnostic System Check?	Go to Step 2	Go to Diagnostic System Check - Engine Electrical
2	Turn the ignition to the START position. Does the starter solenoid click only one time?	Go to Step 3	Go to Starter Solenoid Does Not Click
3	Inspect the engine and the belt drive system for mechanical binding (seized engine, seized generator). Does the engine move freely?	Go to Step 4	Go to Engine Will Not Crank - Crankshaft Will Not Rotate in Engine Mechanical - 3.4L
4	Test the battery positive voltage circuit between the battery and the starter motor for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 8	Go to Step 5
5	Test the ground circuit between the battery and the starter motor for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 8	Go to Step 6
6	Inspect for poor connections at the starter. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition?	Go to Step 8	Go to Step 7
7	Replace the starter motor. Refer to Starter Motor Replacement . Did you complete the replacement?	Go to Step 8	--
8	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2