Removal Procedure
- Remove the throttle body air inlet duct. Refer to
Air Cleaner Inlet Duct Replacement
in Engine Controls-3.4L.
- Use a flat-bladed tool in order to remove
the retaining clip from the automatic transaxle range selector cable.
- Use a large flat-bladed tool in order to
remove the automatic transaxle range selector cable from the cable lever.
- Use pliers in order to depress the cable retainers.
- Remove the automatic transaxle range selector cable from the automatic
transaxle range selector cable bracket.
- Remove the knee bolster. Refer to
Knee Bolster Replacement
in Instrument Panel, Gages and Console.
- If the vehicle is equipped with a console
shift, perform the following steps:
7.2. | Remove the transaxle shift cable from the floor shift control. |
- If the vehicle is equipped with a column
shift, perform the following steps:
8.1. | Remove the retaining clip from the automatic transaxle range selector
cable. |
8.2. | Use a flat-bladed tool in order to remove the automatic transaxle range
selector cable from the column control lever. |
8.3. | Remove the automatic transaxle range selector cable from the steering
column bracket. |
- Remove the automatic transaxle range selector
cable through the cowl.
Installation Procedure
- Properly route the automatic transaxle
range selector cable through the engine compartment.
- Install the automatic transaxle range selector
cable through the cowl.
- If the vehicle is equipped with a column
shift, perform the following steps:
3.1. | Install the automatic transaxle range selector cable to the steering
column bracket. |
3.2. | Install the retaining clip to the automatic transaxle range selector
cable. |
3.3. | Install the automatic transaxle range selector cable to the column control
lever. |
- If the vehicle is equipped
with a console shift, perform the following steps:
4.1. | Install the transaxle shift cable to the floor shift control. |
- Install the knee bolster. Refer to
Knee Bolster Replacement
in Instrument Panel, Gages and Console.
- Install the automatic transaxle range selector
cable to the automatic transaxle range selector cable bracket.
- Install the automatic transaxle range selector cable to the automatic
transaxle range selector lever.
- Install the retaining clip to the automatic
transaxle range selector cable.
- Adjust the automatic transaxle range selector cable. Refer to
Range Selector Lever Cable Adjustment
.
- Install the throttle body air inlet duct. Refer to
Air Cleaner Inlet Duct Replacement
in Engine Controls-3.4L.