Removal Procedure
- Remove the fuel sender
assembly. Refer to
Fuel Sender Assembly Replacement
.
- Disconnect the fuel pump electrical connector (2).
- Remove the fuel level sensor electrical connector retaining clip
(4).
- Disconnect the fuel level sensor electrical connector from under
the fuel sender cover (5).
- Remove the fuel level sensor retaining clip.
- Squeeze the locking tangs and remove the fuel level sensor (3)
from the modular fuel sender.
Installation Procedure
- Install the fuel level
sensor (3) to the modular fuel sender.
- Install the fuel level sensor retaining clip.
- Connect the fuel level sensor electrical connector.
- Install the fuel level sensor electrical connector retaining clip
(4).
- Connect the fuel pump electrical connector (2).
- Install the fuel sender assembly. Refer to
Fuel Sender Assembly Replacement
.
- Inspect for fuel leaks with the following procedure:
7.1. | Turn ON the ignition for 2 seconds. |
7.2. | Turn OFF the ignition for 10 seconds. |
7.3. | Turn ON the ignition. |
7.4. | Inspect for fuel leaks. |