Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Retained Accessory Power (RAP) Schematics Connector End View Reference: Master Electrical Component List in Wiring Systems | |||
1 | Did you perform the Diagnostic System Check for the retained accessory power (RAP) system? | Go to Step 2 | |
2 |
Do the sunroof and the power windows operate? | Go to Step 3 | Go to Step 5 |
3 |
Did you find and correct the condition? | Go to Step 10 | Go to Step 4 |
4 | Replace the console electrical center. Refer to Console Electrical Center or Junction Block Replacement in Wiring Systems. Did you complete the replacement? | Go to Step 10 | -- |
5 |
Does the test lamp illuminate? | Go to Step 7 | Go to Step 6 |
6 | Replace the RAP relay. Did you Complete the replacement? | Go to Step 10 | -- |
7 | Test the RAP relay control circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 8 |
8 | Inspect for poor connections at the console electrical center connector to the BCM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 10 | Go to Step 9 |
9 |
Did you complete the replacement and the set up procedure? | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
