Roof Console Replacement Rendezvous
Removal Procedure
- Open the OnStar® door panel from the overhead console.
- Disconnect the OnStar® electrical connectors.
- Remove the screws from the overhead console.
- Open the garage door panel and remove the screws.
- Disconnect the electrical connectors.
- Remove the overhead console from the vehicle.
Installation Procedure
- Connect the electrical connectors for the garage door and the OnStar® consoles.
- Install the overhead console to the vehicle.
Notice: Refer to Fastener Notice in the Preface section.
- Install the overhead console screws.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Close the garage door panel and the OnStar® door on the overhead console.
Roof Console Replacement Aztek
Removal Procedure
- Open the overhead compartments in order to access
the fasteners.
- Remove the screws.
- Remove the second seat audio control from the overhead console, if equipped.
Refer to
Second Seat Audio Control Replacement
in Entertainment.
- Remove the overhead console from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to the overhead compartments.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the second seat audio controls to the overhead console. Refer
to
Second Seat Audio Control Replacement
in Entertainment.
- Close the overhead compartment doors.