For 1990-2009 cars only
Removal Procedure
- Remove the rear upper garnish molding by pulling the rear roof garnish molding to release the push-in retainers.
- Remove the seat belt escutcheon from the rear roof garnish molding using a small flat bladed tool.
- Disconnect the electrical connector from the rear cargo lamp.
- Remove the rear seat belt from the slot in the rear roof garnish molding.
- Remove the rear roof garnish molding from the vehicle.
Important: The seat belt escutcheon is part of the seat belt assembly.
Installation Procedure
- Install the rear seat belt to the slot in the rear roof garnish molding.
- Connect the electrical connector to the rear cargo lamp.
- Install the seat belt escutcheon to the rear roof garnish molding.
- Install the push-in retainers to the rear roof garnish molding, applying pressure on the molding to secure at all retainer locations.
