GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - FWD 🢒 Body and Accessories 🢒 Interior Trim 🢒 Floor Panel Carpet Replacement

Removal Procedure

    Object Number: 620960 Size: SH
  1. Remove the front bucket seats. Refer to Bucket Seat Replacement in Seats.
  2. Remove the rear seats. Refer to the following procedures in Seats:
    3. •  Rear Bucket Seat Replacement
    •  Rear 50-50 Split Seat Replacement
  3. Remove the rear seats anchor plate bezels. Refer to Rear Floor Carpet Trim Plate Replacement .
  4. Remove the rear cargo tray anchors, if equipped.
  5. Remove the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  6. Remove the front and rear door sill plates. Refer to Front Side Door Sill Plate Replacement and Rear Side Door Sill Plate Replacement .
  7. Remove the endgate sill plate. Refer to Rear Floor Rear Trim Plate Replacement .
  8. Remove the front cowl trim panels. Refer to Cowl Side Trim Panel Replacement .
  9. Remove the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  10. Remove the rear lower quarter trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
  11. Remove the carpet from the vehicle.

Installation Procedure

    Object Number: 620960 Size: SH

    Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material size as the original installation. Always return the carpet to the original location.

  1. Install the carpet into the vehicle.

    2. Reach under the carpet and feed through any electrical harness.

  2. Install the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
  3. Install the center pillar lower trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  4. Install the front and rear door sill plates. Refer to Front Side Door Sill Plate Replacement and Rear Side Door Sill Plate Replacement .
  5. Install the endgate sill plate. Refer to Rear Floor Rear Trim Plate Replacement .
  6. Install the front cowl trim panels. Refer to Cowl Side Trim Panel Replacement .
  7. Install the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gages and Console.
  8. Install the rear seats anchor plate bezels. Refer to Rear Floor Carpet Trim Plate Replacement .
  9. Install the front seats. Refer to Bucket Seat Replacement in Seats.
  10. Install the rear seats. Refer to the following procedures in Seats:
    11. •  Rear Bucket Seat Replacement
    •  Rear 50-50 Split Seat Replacement
  11. Install the rear cargo tray anchors, if equipped.