GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2003 🢒 Rendezvous - FWD 🢒 Features and Controls 🢒 Vehicle Personalization 🢒 Entering Programming Mode

Entering Programming Mode for Buick Rendezvous - FWD 2003

To program features, your vehicle must be in the programming mode. Follow these steps:

  1. Turn the ignition key to ON. The shift lever must be in PARK (P).
  2. Press and hold the trip/reset button, located next to the odometer for two seconds while the odometer is in the odometer mode.

    3. United States
    Object Number: 807217 Size: A1

    Canada
    Object Number: 807084 Size: A1
  3. This message will appear in the message center, located in the instrument panel cluster, as an indication that your vehicle is ready to begin programming.

    4. If you have the remote keyless entry system, you must press the LOCK button. This lets the system know which transmitter is being personalized, since each can be personalized differently.

You can now program your choices.

To exit the programming mode, follow the steps listed under Exiting Programming Mode .