Circuit Description
The height sensor internal circuitry monitors the body to suspension height and detects when this is out of range
Conditions for Running the DTC
Ignition On.
Conditions for Setting the DTC
When the height sensor internal circuitry detects a body to suspension height that is out of range.
Action Taken When the DTC Sets
Leveling functions are disabled.
The Inflator function continues to operate
Conditions for Clearing the DTC
The conditions that caused the DTC to set have been removed.
Diagnostic Aids
This DTC is set when ride height is physically being held out of range.
This DTC can set when the sensor link is damaged or detached.
Test Description
The number(s) below refer to the step number(s) on the diagnostic table.
Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Automatic Level Control Schematics | |||
1 | Did you perform the Automatic Level Control Diagnostic System Check? | Go to Step 2 | |
Check the Automatic Level Control sensor link for damage or being disconnected. Did you find and correct the condition? | Go to Step 4 | Go to Step 3 | |
Replace the Automatic Level Control Sensor. Refer to Automatic Level Control Sensor Replacement . Did you complete the replacement? | Go to Step 4 | -- | |
4 | Operate the vehicle within the Conditions for Running the DTC as specified in the supporting text. Does the DTC reset? | Go to Step 2 | System OK |
