GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 902811  Size: SH
  1. Remove the transmission. Refer to Transmission Replacement .
  2. Remove the engine flywheel bolts and the flywheel. Refer to Engine Flywheel Removal .
  3. Clean and inspect the flywheel. Refer to Engine Flywheel Cleaning and Inspection . If the flywheel teeth are damaged, inspect the starter for proper operation. Replace the starter if there is excessive wear or damage to the starter drive. Refer to Starter Motor Replacement .

Installation Procedure


    Object Number: 902811  Size: SH
  1. Install the engine flywheel. Refer to Engine Flywheel Installation .
  2. Install the transmission. Refer to Transmission Replacement .