GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Rendezvous - FWD 🢒 Engine 🢒 Engine Controls - 3.4L 🢒 Engine Mount Strut Replacement - Right Side

Removal Procedure

    Object Number: 105887 Size: SH
  1. Remove the bolt and the nut from the engine mount strut at the right engine mount strut bracket on the engine.

    2. Object Number: 61850 Size: SH
  2. Remove the bolt and the nut from the engine mount strut at the engine mount strut bracket on the upper radiator support.
  3. Remove the engine mount strut.
  4. Inspect the rubber in the engine mount strut for the following conditions:
    5. • Hardness
    • Splitting
    • Cracking

Installation Procedure

    Object Number: 61850 Size: SH
  1. Install the engine mount strut.
  2. Install the bolt and the nut to the engine mount strut at the engine mount strut bracket on the upper radiator support. HAND TIGHTEN ONLY.

    3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 105887 Size: SH
  3. Install the bolt and the nut to the engine mount strut at the right engine mount strut bracket on the engine.

    4. Tighten
    Tighten both engine mount strut nuts to 48 N·m (35 lb ft).