GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Rendezvous - FWD 🢒 Body 🢒 Interior Trim 🢒 Sunshade Replacement

Removal Procedure

    Object Number: 757203 Size: SH
  1. Release the sunshade from the anchor attachment.
  2. Remove the sunshade screw from the headliner.
  3. Disconnect the electrical connector from the sunshade.
  4. Remove the sunshade.

Installation Procedure
  1. Connect the electrical connectors to the sunshade.

    2. Object Number: 757203 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the sunshade to the headliner with screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Install the sunshade to the anchor attachment.