Application | Specification | |||||||
|---|---|---|---|---|---|---|---|---|
Metric | English | |||||||
Cooler Pipe Clip Bolts | 10 N·m | 89 lb in | ||||||
Cooler Pipe Fittings | 27 N·m | 20 lb ft | ||||||
Front Frame Bolt | 155 N·m | 114 lb ft | ||||||
Inner Tie Rod | 100 N·m | 74 lb ft | ||||||
Intermediate Steering Shaft Bolt | 45 N·m | 33 lb ft | ||||||
Pinion Lock Nut | 30 N·m | 22 lb ft | ||||||
Power Steering Gear Cylinder End Fittings | 27 N·m | 20 lb ft | ||||||
Power Steering Gear Heat Shield Bolts | 14 N·m | 124 lb in | ||||||
Power Steering Gear Rack Bearing Preload Adjuster Lock Nut | 68 N·m | 50 lb ft | ||||||
Power Steering Gear Valve End Fittings | 19 N·m | 124 lb in | ||||||
Power Steering Pressure Pipe/Hose Nut | 25 N·m | 19 lb ft | ||||||
Power Steering Pump to Bracket Bolts (LY7) | 20 N·m | 15 lb ft | ||||||
Power Steering Reservoir Bracket Bolts | 6 N·m | 5 lb ft | ||||||
Power Steering Reservoir Mounting Stud Bolt | 25 N·m | 19 lb ft | ||||||
Pressure Hose Fittings | 27 N·m | 20 lb ft | ||||||
Pump Bolts (LA1) | 34 N·m | 25 lb ft | ||||||
Pump Bolts (LY7) | 50 N·m | 37 lb ft | ||||||
Rear Frame Bolt | 240 N·m | 177 lb ft | ||||||
Steering Gear Bolt (at Frame) | 80 N·m | 59 lb ft | ||||||
Steering Gear Nut (at Frame) * | 80 N·m | 59 lb ft | ||||||
Tie Rod Ball Stud Nut * | 30 N·m + 120 degrees (2 flats) ¹ | 22 lb ft + 120 degrees (2 flats) ¹ | ||||||
* This is a prevailing torque type fastener. This fastener may be reused ONLY if:
If the fastener does not meet these criteria, REPLACE the fastener. ¹ Ensure that 2.5-4.5 tie rod end threads are visible beyond the tie rod ball stud nut nylon. | ||||||||
