GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Engine 🢒 Engine Mechanical - 3.5L 🢒 Drive Belt Idler Pulley Replacement

Removal Procedure

    Object Number: 1640795 Size: SH
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Remove the appropriate drive belt idler pulley bolt.
  3. Remove the appropriate drive belt idler pulley.

Installation Procedure

    Object Number: 1640795 Size: SH
  1. Position the appropriate drive belt idler pulley to either the generator bracket or the engine front cover.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the appropriate drive belt idler pulley bolt.

    3. Tighten
    Tighten the bolt to 50 N·m (37 lb ft).

  3. Install the drive belt. Refer to Drive Belt Replacement .