GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Engine 🢒 Engine Cooling 🢒 Engine Coolant Fan Shroud Replacement

Removal Procedure

    Caution: Refer to Electric Coolant Fan Caution in the Preface section.

    Caution: Refer to Damaged Fan Blade Caution in the Preface section.

    Important: If abnormal noise or vibration is felt from the engine compartment, inspect and clean any foreign material from the cooling fan blades.

  1. Remove the cooling fan assembly including the shroud. Refer to Engine Cooling Fan Replacement .

    2. Object Number: 793515 Size: SH

    Important: Turn the cooling fan nuts clockwise to loosen.

  2. Remove the cooling fan nuts.
  3. Remove the cooling fans from the shroud.

    4. Object Number: 793513 Size: SH
  4. Disconnect the fan motor electrical connectors.
  5. Remove the fan motor screws.
  6. Remove the fan motors from the cooling fan shroud.

    7. Object Number: 368754 Size: SH
  7. Remove the heat shields from the cooling fan shroud.

Installation Procedure

    Object Number: 368754 Size: SH
  1. Install the heat shields to the cooling fan shroud.

    2. Object Number: 793513 Size: SH
  2. Install the fan motors to the cooling fan shroud.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the screws to the cooling fan motor.

    4. Tighten
    Tighten the screws to 6 N·m (53 lb in).

  4. Connect the cooling fan motor electrical connectors.

    5. Object Number: 793515 Size: SH
  5. Install the cooling fans to the shroud.

    6. Important: Turn the cooling fan nuts counterclockwise to tighten.

  6. Install the cooling fan nuts.

    7. Tighten
    Tighten the nuts to 6 N·m (53 lb in).

  7. Install the cooling fan assembly including the shroud. Refer to Engine Cooling Fan Replacement .