Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Record all of the customer's radio station presets.
- Turn OFF all the lamps and accessories.
- Turn the ignition OFF.
- If equipped with regular production option (RPO) LX9, perform the following steps. Loosen the negative battery cable bolt at the battery.
- Remove the negative battery cable (1) from the battery.
- If equipped with RPO LY7, perform the following steps. Open the negative battery cable cover (1).
- Loosen the negative battery cable nut.
- Remove the negative battery cable from the battery.
Installation Procedure
Important: Clean any existing corrosion from the battery terminal and the battery cable end.
- If equipped with RPO LY7, perform the following steps. Install the negative battery cable to the battery.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the negative battery cable nut.
Tighten
Tighten the nut to 16 N·m (12 lb ft).
- Close the negative battery cable cover (1).
- If equipped with RPO LX9, perform the following steps. Install the negative battery cable (1) to the
battery.
- Tighten the negative battery cable bolt at the battery.
Tighten
Tighten the bolt to 16 N·m (12 lb ft).
- Reset all of the customer's radio station presets.