Notice: Cap the fittings and plug the holes when servicing the fuel system in order to prevent dirt and other contaminants from entering the open pipes and passages.

1. Remove the engine. Refer to Engine Replacement .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
3. Disconnect the evaporative emission (EVAP) pipe from the fuel tank EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .



4. Remove the EVAP pipe from the fuel pipe retainers.
5. Remove the EVAP pipe from the vehicle.

1. Install the EVAP pipe from the vehicle.
2. Install the EVAP pipe to the retainers.



3. Connect the EVAP pipe to the fuel tank EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .
4. Lower the vehicle.
5. Install the engine. Refer to Engine Replacement .