GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Engine 🢒 Engine Controls - 3.6L 🢒 Camshaft Position Sensor Replacement - Bank 1 (Right Side) Intake

Removal Procedure
  1. Turn the ignition OFF.

    2. Object Number: 1394032 Size: SH
  2. Remove the power steering pressure hose bracket nut and reposition the hose as necessary in order to gain access. Refer to Power Steering Pressure Pipe/Hose Replacement in Power Steering System.
  3. Disconnect the camshaft position (CMP) sensor electrical connector (2).

    4. Object Number: 1395982 Size: SH
  4. Remove the CMP sensor bolt.
  5. Remove the CMP sensor.

Installation Procedure

    Object Number: 1395982 Size: SH
  1. Install the CMP sensor.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the CMP sensor bolt.

    3. Tighten
    Tighten the CMP sensor bolt to 10 N·m (89 lb in).


    Object Number: 1394032 Size: SH
  3. Connect the CMP sensor electrical connector (2).
  4. Install the power steering pressure hose bracket and nut as necessary . Refer to Power Steering Pressure Pipe/Hose Replacement in Power Steering System.