For 1990-2009 cars only
Removal Procedure
- Remove the left instrument panel (IP) insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side.
- Push in the retaining tab to release the amplifier.
- Slide the amplifier out of the bracket.
- Disconnect the electrical connectors.
- Remove the amplifier from the vehicle.
Installation Procedure
- Connect the electrical connectors to the amplifier.
- Align the pins on the amplifier to the slots on the bracket.
- Slide the amplifier forward until the lock tab is seated.
- Install the left IP insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side in Instrument Panel, Gages, and Console
- Refer to Control Module References for programming and setup information.
