Step | Action | Yes | No |
---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Ensure that the brake pedal is not depressed. Do the stop lamps remain OFF? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Disconnect the stop lamp switch. Do the stop lamps turn OFF? | Go to Step 4 | Go to Step 5 |
4 | Inspect the stop lamp switch adjustment. Refer to Stop Lamp Switch Adjustment . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
5 | Repair a short to battery positive voltage in the stop lamp switched circuit or the stop lamp supply voltage circuit. Refer to Wiring Repairs or to Connector Repairs . Did you complete the repair? | Go to Step 7 | -- |
6 | Replace the stop lamp switch. Refer to Stop Lamp Switch Replacement . Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |