Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics Connector End View Reference: Master Electrical Component List | |||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |
2 | Turn the headlamp switch to the OFF position. Do the low and high beam headlamps remain OFF? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
3 | Remove the relay. Do the lamps turn OFF? | Go to Step 5 | Go to Step 4 |
4 | Repair a short to battery positive voltage in the supply circuit of the headlamps. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 7 | -- |
5 | Test for a short to ground in the relay control circuit. Refer to Circuit Testing and Wiring Repairs . Did you find and correct the condition? | Go to Step 7 | Go to Step 6 |
6 | Replace the relay. Refer to Relay Replacement . Did you complete the replacement? | Go to Step 7 | -- |
7 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
