GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Suspension 🢒 Wheel Alignment 🢒 Rear Camber Adjustment

Removal Procedure
  1. Place vehicle on alignment machine with rear wheels supported by Weaver plates.

    2. Object Number: 629235 Size: SH
  2. Loosen rear lower control arm mounting nuts (3, 4) .
  3. Adjust camber with cam bolt (1).
  4. Confirm correct camber value.
  5. Check toe alignment and adjust if required.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 629235 Size: SH
  1. Tighten the lower control arm mounting nuts (3, 4).

    2. Tighten

        • Tighten the nut (3) to 145 N·m (107 lb ft).
        • Tighten the nuts (4) to 50 N·m (37 lb ft).
  2. Test drive the vehicle.