Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
1 | Did you review the General Description and perform the necessary inspections? | Go to Step 2 | |||||
2 |
Important: Verify the vehicle suspension package RPO. Verify that the ride is too soft or too hard. Does the vehicle ride normally? | System OK | Go to Step 3 | ||||
3 | Inspect the tire inflation and adjust to specifications. Refer to Tire Inflation Description . Did you adjust the tire pressure? | Go to Step 7 | Go to Step 4 | ||||
4 | Inspect the vehicle trim height. Refer to Trim Height Inspection . Did you find and correct the condition? | Go to Step 7 | Go to Step 5 | ||||
5 | Inspect the following suspension components for wear or damage.
Did you find and correct the condition? | Go to Step 7 | Go to Step 6 | ||||
6 | If equipped with the automatic level control system refer to Diagnostic Starting Point - Automatic Level Control . Do you have and perform a special ride package procedure? | Go to Step 7 | System OK | ||||
7 | Drive the vehicle in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
