Removal Procedure
- Remove the accessory fill valve access cover.
- Remove the lower rear quarter trim panel. Refer to
Quarter Lower Rear Trim Panel Replacement
.
- Disconnect the air hose (1) from the accessory fill valve (5).
- Remove the cap (2), nut (3), and washer (4) from the accessory fill valve (5) .
- Remove the accessory fill valve from the trim panel.
Installation Procedure
- Install the accessory fill valve into the trim panel.
Notice: Refer to Fastener Notice in the Preface section.
- Install the washer (4) and the nut (3) to the accessory fill valve.
Tighten
Tighten the accessory fill valve nut to 6 N·m (53 lb in).
- Install the cap to the accessory fill valve.
- Install the hose (1) onto the accessory fill valve (5).
- Install the lower rear quarter trim panel. Refer to
Quarter Lower Rear Trim Panel Replacement
.
- Install the accessory fill valve access cover.