Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the stabilizer shaft link bolt and nut.
- Use a pry bar in order to remove the stabilizer shaft link insulators and the spacer.
Installation Procedure
- Use a pry bar in order to install the stabilizer shaft link insulators and the spacer.
- Install the stabilizer shaft link and insulators.
Notice: Refer to Fastener Notice in the Preface section.
- Install the stabilizer shaft link bolt and nut.
Tighten
Tighten the stabilizer shaft link nut to 18 N·m (13 lb ft).
- Lower the vehicle.