Front Floor Console Compartment Door Latch Replacement Rendezvous

1. Remove the console armrest. Refer to Front Floor Console Armrest Replacement .
2. Remove the screws from the armrest.



3. Pull on the armrest to separate the front of the armrest from the door frame.
4. Pull the latch from the door frame.



5. Remove the latch.

1. Install the latch to the door frame.
2. Press the latch onto the door frame until the latch is fully seated.




Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the armrest to the door frame with screws.

Tighten
Tighten the screws to 2 N·m (18 lb in).

4. Install the armrest to the console. Refer to Front Floor Console Armrest Replacement .