High Mount Stop Lamp Replacement Rendezvous

1. Remove the screws from the high mounted stop lamp.
2. Remove the high mounted stop lamp from the roof panel.
3. Disconnect the electrical connector from the high mounted stop lamp.
4. Remove the high mounted stop lamp from the roof panel.

1. Position the high mounted stop lamp to the roof panel.
2. Connect the electrical to the high mounted stop lamp.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the high mounted stop lamp screws to the high mounted stop lamp.

Tighten
Tighten the high mounted stop lamp screws to 3.5 N·m (31 lb in).