Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Disable the SIR System. Refer to
SIR Disabling and Enabling
in SIR.
- Remove the steering wheel. Refer to
Steering Wheel Replacement
.
- Remove the retaining screws (2, 3) from the steering wheel rear
bezel.
- Remove the steering wheel rear bezel (1).
- Disconnect the electrical connector.
- Insert a small, blunt-ended tool into the access hole in the back of the
steering wheel. Push the switch out of the steering wheel.
Installation procedure
- Connect the electrical connector.
- Align the switch to the opening in the steering wheel.
- Push the switch into the steering wheel.
- Install the steering wheel rear bezel (1).
Notice: Refer to Fastener Notice in the Preface section.
- Install the retaining screws (2, 3) to the steering wheel
rear bezel.
Tighten
Tighten the screws to 3 N·m (27 lb in).
- Install the steering wheel. Refer to
Steering Wheel Replacement
.
- Enable the SIR System. Refer to
SIR Disabling and Enabling
in SIR.