GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the rear seats. Refer to the following procedures:
  2. •  Rear Bucket Seat Replacement
    •  Rear 50-50 Split Seat Replacement

    Object Number: 625143  Size: SH
  3. Release the T-pin retainer in the anchor plate bezel using a small flat-bladed tool.

  4. Object Number: 625140  Size: SH
  5. Remove the anchor plate bezel from the floor.

Installation Procedure


    Object Number: 625140  Size: SH
  1. Position the anchor plate bezel to the floor.

  2. Object Number: 625143  Size: SH
  3. Install the T-pin on the anchor plate using a small flat-bladed tool, pressing into place until fully seated.
  4. Install the rear seats. Refer to the following procedures:
  5. •  Rear Bucket Seat Replacement
    •  Rear 50-50 Split Seat Replacement