Caution: If a window is cracked but still intact, crisscross the window with
masking tape in order to reduce the risk of damage or personal injury.
Important: Before cutting out a stationary window, apply a double layer of masking
tape around the perimeter of the painted surfaces and the interior trim.
- Remove the rear wiper motor. Refer to
Rear Window Wiper Motor Replacement
in Wipers/Washer Systems.
- Remove the center light applique.
- Disconnect the rear liftgate
window defogger connectors from the right and the left sides.
- Tape off and protect the inner edges of the rear window defogger
grid lines from the window removal tool.
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
Important: Keep the cutting edge of the tool against the window. Inspect the depth
of the cutting blade before starting.
- Separate the urethane adhesive from the window:
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
- With the aid of an assistant,
remove the liftgate window from the liftgate.
Place the liftgate
window (2) face up on a soft protective cover.
