Removal Procedure
- Remove the instrument
panel (I/P) cluster trim plate bezel . Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument Panel, Gages
and Console.
- Grasp the headlamp switch and pull firmly to release the retaining
tabs from the I/P carrier.
- Disconnect the electrical
connector from the headlamp switch.
- Remove the headlamp switch.
Installation Procedure
- Connect the electrical
connector to the headlamp switch.
- Position the headlamp
switch to the retainers in the I/P carrier.
- Install the headlamp switch to the I/P carrier. Press the switch
into place until fully seated.
- Install the I/P l cluster trim plate bezel. Refer to
Instrument Panel Cluster Trim Plate Bezel Replacement
in Instrument
Panel, Gages and Console.