GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Accessories 🢒 Object Detection 🢒 Information Center Telltale Assembly Replacement

Removal Procedure

    Object Number: 491154 Size: SH
  1. Position your fingers between the headliner and the information center telltale assembly bezel and gently pull down to release the display bezel retainers.

    2. Object Number: 491156 Size: SH
  2. Use a small flat-bladed tool to release the locking tab at the rear of the telltale assembly.

    3. Object Number: 491157 Size: SH
  3. Tilt the information center telltale assembly down and pull down to remove.
  4. Disconnect the electrical connector from the information center telltale assembly.

Installation Procedure

    Object Number: 491157 Size: SH
  1. Connect the electrical connector to the information center telltale assembly.
  2. Position the information center telltale assembly into the headliner until locking tab locks into position. It may be necessary to rock the display into position.
  3. Install bezel by pressing into place until the locking tabs are fully seated.