Removal Procedure
Caution: Refer to Brake Dust Caution in the Preface section.
- Release the park brake.
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Loosen the park brake cable equalizer nut in order to remove the park brake left side cable from
the park brake equalizer.
- Remove the left rear park brake mounting bracket.
- Remove the park brake cable from the park brake actuator.
- Compress the locking ring and release the park brake cable from the bracket.
Installation Procedure
- Install the park brake cable to the park brake actuator.
- Install the park brake cable to the park brake cable bracket.
Notice: Refer to Fastener Notice in the Preface section.
- Position the park brake cable mounting bracket to the wheel knuckle and install the nut.
Tighten
Tighten to 10 N·m (89 lb in).
- Install the park brake left side cable to the park brake equalizer.
- Adjust the park brake cable. Refer to
Park Brake Adjustment
.
- Lower the vehicle.